Have a question? Email: Support@DeLuxeDome.com

0% APR Financing Options Available at Checkout

DROLET  |  SKU: DB03028

[Savannah II] Wood Burning Stove - DROLET

Shipping calculated at checkout.


[Savannah II] Wood Burning Stove - DROLET

Of medium size, the Savannah II wood stove is ideal for heating spaces up to 1,800 ft². With a maximum heat output of 65,000 BTU/h, this EPA certified at 2.4 g/h non-catalytic unit represents an eco-responsible heating source. The standard air deflector on the Savannah II will boost air movement through the room.
  • Included: pedestal with ash drawer, air deflector, ceramic glass, ash lip, air damper

    ▪ Up to 7 hours burn time
    ▪ Up to 18" logs
    ▪ Heavy duty 5/16" steel top reinforced with a stainless steel heat shield
    ▪ EPA certified
    ▪ Proudly made in Canada
    ▪ Limited lifetime warranty
    ▪ Certified for mobile home and alcove installation



  • Recommended log length: 16 in (406 mm) east-west
  • Maximum log length: 18 in (457 mm) east-west
  • Flue outlet diameter: 6 in (150 mm)
  • Recommended connector pipe diameter: 6 in (150 mm)
  • Type of chimney: ULC-S629, UL 103 HT (2100 °F)
  • Minimum chimney height: 12 feet
  • Baffle material: Vermiculite
  • Approved for alcove installation: Yes
  • Approved for mobile home installation: Yes
  • Type of door: Simple, glass with cast iron frame
  • Type of glass: Ceramic glass
  • Blower: Optional (up to 100 CFM)
  • Particulate emission standard: EPA / CSA B415.1-10
  • USA standard (Safety): UL 1482, UL 737
  • Canada standard (Safety): CAN/ULC-S627




Clearances for Wood Stove Installation:


Additional Notes:

  • The information on the certification label always takes precedence over other published information.
  • Before setting up your unit, refer to the installation manual.
  • Performance specifications are based on a fuel load and moisture content as prescribed by standards.
  • This appliance is tested and certified by an independent agency.
  • Maximum heat output and other performance metrics are based on various loading densities and moisture content specifications.
  • The appliance's heat transfer efficiency and chemical loss during combustion are considered in its design.
  • The recommended heated area for a given appliance is defined by the manufacturer, considering factors such as location, climate, and fuel type.


  • 24 7/8" W X 23 5/8" D X 30 5/8" H
View product